From MIKE2 Methodology
Listed below are products from IBM as they map to the Information Asset Management Offering Group.
Product Model Activity Indicators
The indicators below define the typical level of applicability of technology products to meet the requirements of the Core Solution Offerings shown below.
Product Model Indicators for MIKE2.0
| Not Yet Rated | Not Relevant to Solution | Typically does not Apply | May Apply to Solution | Typically Applies | Mandatory for Solution
|
 |  |  |  |  | 
|
|
Key aspects of these indicators and their application is as follows:
- This model is not a vendor capability rating; the purpose of this model is to map whether vendor products should be applied to specific Core Solution Offerings.
- In order to show completeness of a solution offering, an architectural component list should also be defined that maps to each vendor solution offering.
- Vendors will sometimes offer 'lite' versions of their product for small-to-medium size enterprises. For most Solution Offerings mapping the more sophisticated of the products has been selected as the primary fit.
- This product model defined in this article is focused on the specific products needed to fulfill this solution. For example all projects require a baseline infrastructure platform but these components may not be listed in the solution.
This model is only supposed to be indicative and should not replace diligence in product selection. Contributors are encouraged to edit these models through changing indicators or adding comments below.
Product Mapping to Solution Offerings
| MIKE2.0 Methodology Product Mapping Model
|
Comments
BlogMarks
del.icio.us
digg
Furl
Simpy
smarking
